Tag Archives | Squirrel

RC FAQs: How To Paint The Water Drop Effect by Squirrel

Ever seen a RC shell where it looks like it had water beads on it but it was actually the paint scheme? And it looked real?  Its actually very easy to do and it uses real water.

By the way, if you try this then please try it on a piece of spare lexan before using. I have used this with pactra and it didn’t work. However, it works great on spaz stix paint.

Continue Reading Comments { 0 }

RC FAQs: How To Paint A Shell or Body (Squirrel’s Way) by Squirrel

How to paint a RC body

There are many ways on how to paint a shell. There is the tape method which is ok. Personally, I don’t like it as the lines can bleed through and not be crisp. Then there are the masks. If you do these then get the vinyl ones. They are like taping, only they are like stickers and seal better. The third way, and the ones that I prefer, involve using parma masking or Bob Dively masking. For this walk through I will be using Bob. If you want to post a thread on the others then please do! :( We would all like to read it!!!

The liquid masks are a thick liquid that can be airbrushed or brushed onto the inside of a shell. The liquid paste dries and new coats can be applied. Typically you will want to apply 2 to 3 layers. The reason why I prefer Bob over Parma is that the lines come out better and the liquid mask can be applied and used within 7 days. Parma you almost have to use immediately or else it will not be as pliable or easy to work with.

Continue Reading Comments { 0 }

RC FAQs: How To Clean Your RC by Squirrel

[youtube http://www.youtube.com/watch?v=lwHvMWKr-_c]

So, you just had fun tearing your RC across the track or your favorite bash site. It’s now filthy and you want to clean it. What to do?

There are some people who are anal about cleaning like I am. There are also those who do want to clean as often as it takes too much time. Cleaning is a choice and it is not mandatory as it is your kit and yours to do what you feel. However, top pros will tear down their kit after every race, or bash period, as it is a good practice to get into. If for nothing else, have a clean RC means that you take care of it, inspect it, and know that when you pull it off the shelf it will work. Cleaning is not just removing dirt off of the chassis. It is inspecting for worn parts, broken or cracked parts, missing parts, and extreme wear.

The following are just the basics and general guidelines. It is up to yourself, the user, to adopt the procedures that you feel is necessary.

Continue Reading Comments { 0 }

RC FAQ: Nitro After-Run Procedures by Squirrel

After Run Procedure
[youtube http://www.youtube.com/watch?v=NeDqV0Y_G60]
After run procedure guidelines should be followed for maximum life of the rc engine and also the kit. Following these simple rules always reduces downtime and repair bills as you will keep up with your RC and prevent major damage when you repair things as they happen.

Continue Reading Comments { 0 }

RC FAQs: How To Glue Tires To Rims by Squirrel

Gluing your tires, without a mess, is something that is commonly learned over time. But, how do you do it where it is a one shot deal?

This is also helpful to the new entrant to RC where kits are now starting to pop up with rims but no tires. Which, can seem odd but it also allows tires that are customized to the track and course that you are running. I just received a Team Magic buggy that was this way and it is considered one of their entry to mid level kits.

The first part of assembling the tires is to feed the foams into the tire. Place the foam inside one corner and then work it around the inside of the tire so that it is flat and even on all sides.

Continue Reading Comments { 0 }

RC FAQs: Tips on how to buy used RCs and sell them

We have all been there and have all done it. For some, getting into the hobby is a financial burden as it can be a lot of money to sink. For other people it is not worth paying r to $700 for a brand new kit when you can get a used one for less. 

The main question is…. Is it worth the cash that you are about to lay on the line and what is and is not too much?

This article is for the person who wants to save some cash but also not get hosed. The advice in this article has served me well for years.

It can be great or it can be a bombshell….BUYER BEWARE!!!

Ah! The lovely smell of commerce and the secondary market is one where the consumer always wants the best for the cheapest price. If you are negotiating do not insult the seller by saying “what is the lowest price shipped you will sell this for?” I can honestly tell you that I am the kind of guy that will work with people and their budgets as I want to see them go to a good home. Most good RC’ers are this way as well. Insult us an that deal immediately goes bad.

Next, when you get the kit do not expect it to be new. It is used. This means that someone else had it and ran it. They:

1) May not be RC experts and have no idea what they were doing.
2) Have broken parts and may not have realized it
3) May consider things to be routine running and you may not.

You are saving cash by not buying new. If you want it to be perfect then buy new. 

Continue Reading Comments { 0 }

Squirrel TV 89: Nitro vs Electric Durability, Used Vehicles – What To Look For, Best Buggy?

Continue Reading Comments { 0 }

Rc Setup Guide PT 2 by Squirrel

RC Setup Guide PT 2

This is part two of two of the setup guide. There are 21 topics covered in total. Not all are covered below.

Vids in the series:
Part 11- Brakes http://www.youtube.com/watch?v=x-kbmqWN9Uw
Part 12- Differentials http://www.youtube.com/watch?v=FSA6A4dfWyc
Part 13- Anti squat http://www.youtube.com/watch?v=PcPDwrXcfm0
Part 14- Gearing http://www.youtube.com/watch?v=d0CyI19INu0
Part 15- Kickup http://www.youtube.com/watch?v=jZHbqH6le98
Part 16- Throttle servo setup http://www.youtube.com/watch?v=hqLcyobUK4w
Part 17- Wheel Balancing http://www.youtube.com/watch?v=dtdXDstLr7s
Part 18- Lipo battery conversion for nitros http://www.youtube.com/watch?v=2A6nSXfqIp8
Part 19- Wheelbase http://www.youtube.com/watch?v=3hKQ3U6xhKo
Part 20- Shock tower positions http://www.youtube.com/watch?v=K-i5pHdxQi4
Part 21- After race/ running procedures  http://www.youtube.com/watch?v=QjdYcvMkwIo

Brakes

Brake setup is important as it handles how gradually or how sharply you will stop. This will effect the weight transfer, stability, and control. There is a fine line between the two.

Some RC kits come with a thumbscrew adjustment that can be turned in or out. When the brakes are adjusted correctly, this adjustment will lengthen the use of the bar or shorten it. If you have one of these thumbscrews then turning it in will reduce the length of the brake rod and thus make the braking action seem more abrupt and sudden, and thus, leading to more weight transfer and instability.

The opposite is true if you lengthen it. The brake pads will have less to grab and hold onto. Thus, the braking action will be more gradual, or even to an extreme, non-existent.

Fixed brake levers work in the same manor as the above. Adjustments are made with the radio on to ensure that the brake comes on (the set screw that pulls on the lever) and releases (the set screw that pushes the brake into a clearing state) when they are supposed to.

These levers control a pivot arm that is blocked at the bottom. This block will push the brake pads out to grab the brake disc. The adjustment to this is the screw length. The less room the close pad has to be pushed to compress the disc against the pad that is attached to the screw head then the more abrupt the stop will be. Increasing the screw length will give more play in the braking and allow for a more gradual stop.

Continue Reading Comments { 0 }

RC Setup Guide PT 1 (vids 1 through 10) by Squirrel

Squirrel’s RC Set=up Guide PT 1

I have seen a lot of questions about set up or things that could be answered through proper setup. When you build a Pro level kit you will be introduced with a lot of tuning options. The astute builder will notice them and wonder why they are telling you to build the kit this way.

In order to answer these questions I went through a few Pro level manuals that I own. They do not explain all but I have written notes about the adjustments of each through my own research to know what it is exactly I am doing and adjusting. Then, as the years past, I have gained first hand knowledge and also other sources that have popped up that have helped out tremendously. Hopefully these collages of notes will you out as well. This is not complete by any means at all. The 21 subjects that are covered are a tip of the ice berg. However, the ones that I have chosen are either directly related to another or are the meat and potatoes of a good basis of understanding.

The key to a good basher, or a good racer, is a good setup. Racing is 90% skill. And that is very true. However, if your kit is miss-aligned then it will require 110% skill to overcompensate for the lack of setup and tuning. I do believe that the heart of the 90% skill comment is over the trends of buying the biggest and best engines, pipes, and electronics. However, I feel that there is so much you can do for arguably nothing that will make you look better than you could be… and that is set up.

[b[In this series[/b]

Vid 1- Camber- http://www.youtube.com/v/tUQ1xWaNf9g
Vid 2- Caster- http://www.youtube.com/watch?v=6LRNZH3-YV8
Vid 3 Ackerman- http://www.youtube.com/v/i5sY7Q1Hso0
Vid 4 clutchs- http://www.youtube.com/v/tLS1WshkpKI
Vid 5 downstops- http://www.youtube.com/v/Brz8O90v9Sc
Vid 6 Ride Height- http://www.youtube.com/v/W9ZuLn_gNOI
Vid 7 Shocks- http://www.youtube.com/v/wJnGA6Qup8s
Vid 8 Steering servo setup- http://www.youtube.com/v/hz6nTW3llFY
Vid 9 Toe- http://www.youtube.com/v/KyENiQnXpv8
Vid 10 Wings- http://www.youtube.com/v/83j9zluzEU0

Vid 11 through 21 will appear on another guide.

Continue Reading Comments { 0 }

RC FAQs: Crawler Winch Install Guide by Squirrel

3 Racing Winch; 1/10th scale crawler accessory

Image

Video:

http://www.youtube.com/watch?v=cAQHaYvLQHY

The 3 racing crawler winch is designed to give your scaler the look of realism while also providing a functional winch that can actually pull moderately light objects. The link below will take you straight to the winch:

http://www.thetoyz.com/cart/thetoyz_detail…2010%20SCORPION

Continue Reading Comments { 0 }